- Up to 10FT (1 Window)
- 12FT and Over (2 Windows)
Need an odd size? Get in touch with us.
Call for more information: 01226 215 090
We will call you to organise a delivery date.
Delivery & Fitting Cost Calculator
Premium Garden Shed Yorkshire UK
WHY MCD SHEDS ARE THE BEST ON THE MARKET?
Scandinavian timber is a lot different from native UK timber in terms of it’s quality & strength. Local timber is a far lower quality because it’s younger (generally 3-5 years as opposed to a min 15 years from Scandinavian) it’s therefore very soft and there are a large amount of knots in native timber which obviously weaken the timber and garden shed. All our timber is all planed again throughout in the workshop, this means that the timber is smooth. This is not just good for handling purposes but also because it’s smooth it will not absorb water into it unlike rough timer will. Rough timber as mentioned above will act like a sponge and absorb moisture/rain water etc. whereas the rain water will usually just run off the planed ship-lap boards.
Some of our competitors advertise they use treated timber for their garden sheds, however it is not pressure treated timber. Pressure treated timber is what should be used for any timber used externally. The timber is placed in a sealed vessel at the workshop and is injected with treatment under high pressure so that it goes right into the timber. The treatment is an anti-rot preservative and also an insect repellent. Timber that is not pressure treated should not be used externally as it will simply just start to rot straight away. Some other sellers say that the timber is ‘treated’, normally just paint it and this doesn’t actually protect the timber, it just puts a colour on it and the timber will still get damp and wet and then rot.
The shiplap boards we use are 23.5mm thick, with a planed finish of 18-19mm. Normally the shiplap used by most other sellers is only 12/13mm. Also our shiplap board are interlocking board and not t&g (tongue & groove). 12/13mm boards are always t&g as they are not strong enough to interlock. Our boards are very strong and come with the shiplap edge for water to run off.
The framing on all of our garden buildings is 36x75mm throughout with a smooth planed finish (floor, all panels, roof). This is pretty much unrivalled. As a result our sheds are definitely the strongest on the market. Many of our competitors use only 32x35mm, so ours is over double the thickness. All of our framing timber is fully pressure treated. The flooring on all our sheds is similar to the shiplap (23.5mm boards, planed to 18 - 19mm) and is also an interlocking board. It has a unique design which we came up with for strength. As we use Scandinavian timber throughout the thickness and strength are the best around.
The roofing on all of our sheds are box-profile metal. Box profile is industrial strength as opposed to corrugated steel, etc. Box profile is the sheeting you would find on industrial units and ours is always in a slate grey colour. We also fit a metal ridge cap on the very top of all garden sheds and sheets & ridges are screwed down with 38mm roofing screws.
Note: majority of garden sheds on the market have mineral felt roofs. Felt is actually an underlay material and therefore is only a temporary material with a limited lifespan when exposed in the elements. Generally it will wear and tear allowing water to get into the timber in the shed. Once water gets into the shed, no matter how good the shed is, it will now rot!
The windows on all of our sheds are acrylic. Acrylic is 17 times stronger, clearer and safer than glass, also unlike perspex it doesn’t discolour. Generally on sheds, the window size is 2ft square, however we can do different sizes and some models might have a different size (i.e. 6ft wide chalets & lodges). Doors with windows in them are also made using acrylic and we can do varies designs and custom builds. Our garden sheds come with one or two windows as standard, if you require more windows please contact us for a bespoke quote.
The interior of all MCD garden buildings (roof, gables and sidewalls) are all lined with a breathable membrane to protect from damp & condensation. Most garden sheds are not lined at all and sometimes if you read the small print on shed brochures it will read that they are not suitable for storage purposes! Other sellers that may line the sheds usually charge extra, this is normally advertised as a vapour barrier but is actually a plastic sheet and this in fact makes the shed sweat more, resulting in damp, rot & mould issues in a very short time of owning your new shed. Our lining is white in colour and it looks good & keeps the sheds bright inside. The membrane works by absorbing any moisture and will retain it until the temperature rises and moisture dissipates naturally.
Galvanised Nails & Screws
All shed panels are nailed in the workshop using coil nail guns and most importantly using Hot-Dipped Galvanised Nails. This means the nails are properly galvanised as opposed to coated or zinc coated galvanised nails, or nails not even galvanised at all. Those inferior nails will ultimately leave streak marks on the shed panels, this is because they are rusting (not suitable for external use) which means the timber will generally then rot or crack around the rusting nails. In terms of hinges and pad-bolts, etc. again we use proper galvanised goods. We use 300mm Tee Hinges on all doors and all sheds are supplied with a lockable pad-bolt.
On assembly, the sheds will be screwed together (5.0x70mm wood screws). All competitors recommend nailing the panels together on assembly, however the advantages of screwing the panels together are that: The sheds can be disassembled (easily) if ever needed to. Sheds that are nailed are very difficult to disassemble and re-erect as the timbers get damaged when taking the panels apart and rarely go back in one piece. Nails also rust and as mentioned above, the timber surrounding the rusty nail will then split and rot.
Delivery & Installation
We offer delivery and installation to the whole of the UK mainland. If you are looking for a delivery and installation quote please use our delivery and installation calculator that is displayed on each of our products or contact us directly:
Call: 01226 215 090
- 4x6ft up to 24x12ft
- approx 8ft
- Pressure Treated 23.5mm
- Box-profile metal roof
- Pressure Treated 75x36mm
- Internal lining
- Breathable membrane
- Security Pack
- 10 years anti-rot
- Made in Ireland